1 Origin SUMITOMO CNHMS2-6115YB-17 CYCLO 6000 MOTOR, 2 HP MAKE OFFER

1 Origin SUMITOMO CNHMS2-6115YB-17 CYCLO 6000 MOTOR, 2 HP MAKE OFFER gear pump is a rotary pump that relies on the working volume change and movement between the pump cylinder and the meshing gear to deliver the liquid or to pressurize it. The two gears, the pump body and the front and rear cover to form two enclosed spaces.
When the gear rotates, the volume of the space on the gear off side becomes small and forms a vacuum to suck the liquid, and the volume of the space on the gear meshing side changes from large to large Small, and the liquid into the pipe to go.
The suction chamber and the discharge chamber are separated by the meshing lines of the two gears. The pressure at the discharge port of the gear pump depends entirely on the resistance at the pump outlet.
The concept of the gear pump is very simple, that is, its most basic form is the same size of the two gears in a tight fit with the internal rotation of the shell, the shell of the internal similar to the "8" shape, the two gear mounted inside , The outer diameter of the gear and the two sides with the shell closely. The material from the extruder enters the middle of the two gears at the suction port and fills the space, moving along the housing as the teeth rotate, and finally discharging when the teeth are engaged.
Our Company is proud to support our quality products with 1 Origin SUMITOMO CNHMS2-6115YB-17 CYCLO 6000 MOTOR, 2 HP MAKE OFFER services before and after the sale.
We have Regional Sales Managers that will work with you to identify opportunities, review requirements, provide training and assist with forecasting and commercial concerns. Our Industry Service Specialists will take it to the next level by providing field services such as; 1 Origin SUMITOMO CNHMS2-6115YB-17 CYCLO 6000 MOTOR, 2 HP MAKE OFFER inspections, hands on training and assistance with installation, inspection, maintenance, reinstallation, field repair and/or factory reconditioning.
We can provide complete 1 Origin SUMITOMO CNHMS2-6115YB-17 CYCLO 6000 MOTOR, 2 HP MAKE OFFER application review by combining the efforts of your operations and maintenance personnel with our design and application engineers. Our Industry Service Specialist’s comprehensive review of the bearings to be inspected or removed from service to determine where you will best benefit from making improvements.
This total approach of application, equipment, products and maintenance will lead to Our company’s goal of helping you establish the best practices for your specific situation resulting in the best value and return on bearing and maintenance expense through improved performance and reduced downtime.

Welcome to Canarsky & Daughters. We are here to sell these items. We are looking forward to doing business with you, so have fun browsing and buying. Reasonable offers are always welcomed.

SEARCH OUR STORE BY CLICKING HERE!!

ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms, please write us with your concern.

*By placing your bid, you accept these terms and agree to abide by them.*

*************
THIS LOT CONSISTS OF: 1 NEW SUMITOMO CNHMS2-6115YB-17 CYCLO 6000 MOTOR, 2 HP, PART #PA160430. CONDITION: NEW SURPLUS. NO REASONABLE OFFER REFUSED.

The approximate shipping weight is 77 lbs.
*************

All items are sold "as is".
Unless described as "new" above, items are used.
*** We do not have the facilities to test most of these items. ***
You are only buying the item(s) pictured/described.

ALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS, YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED.
Please note, IT IS THE BUYERS RESPONSIBILITY TO DO RESEARCH AND CONFIRM THIS IS THE CORRECT ITEM FOR YOUR NEEDS. We are not experts in these fields and so may not be able to give you the answers you require. We will, however do our best to find the information you request.
THANK YOU FOR YOUR COOPERATION.

This item must be settled for immediately. All items not settled for in full will be relisted or sold at our discretion and appropriate feedback will be left.

The complete amount must be SENT VIA PayPal.
PLEASE NOTE: The actual shipment of your item(s) may take anywhere from 1 to 10 days depending on such factors as the items weight, holidays, weather, etc. plus the actual delivery time.
The tracking number will be provided by request.

*Once a package is shipped and leaves our site, we are no longer responsible for it unless we mislabel or otherwise create an error resulting in its loss.*

*We insure all packages shipped through USPS. Any damaged package received should be addressed with the delivering USPS office and a claim filed there.*

Shipping weight of this item is approximately 77 lbs.

CLICK HERE TO SEE OUR OTHER ITEMS FOR SALE ON EBAY

PAYMENTS MUST BE MADE IN FULL IMMEDIATELY. SEE TERMS FOR ANY ADDITIONAL INFO NEEDED.

Sumitomo in the mainland of the cooperation process, to absorb a large number of cooperation agencies, to promote the hydraulic pump, motors, cylinders, hydraulic valves and other products flow, our company is a professional sales agent SUMITOMO Sumitomo spare parts products. Sumitomo Sumitomo products with a full range, low prices, fast delivery, after-sales service is guaranteed and other advantages, with the domestic SUMITOMO Sumitomo distributors, production plants, the use of customers, the establishment of a long-term supply and trust relationship. At the same time in order to shorten the delivery period to ensure that the customer's personal interests, but also specifically established SUMITOMO Sumitomo common spare parts